What is Rebar Testing?
Rebar Testing is a destructive material testing. It is conducted to assure the quality of the rebar if it follows the national standards. There are two types of tests, the tensile test and bending test. Before they proceed with the testing, the testing technicians will check the physical properties of the rebar listed below:
Physical properties:
- Length of specimen (mts.)
- Weight of test specimen (kgs)
- Diameter of test specimen (mm)
- Cross-sectional area of test specimen (sq.mm)
- Unit mass of specimen (kg/mts.)
- Variation in Mass (%)
And after the testing we will determine its deformation properties which are listed below:
Deformation:
- Average spacing of lugs, mm
- Average height of lugs, mm
- Sum gaps of lugs, mm
- Mechanical Properties:
- Yield point, N/sq.mm (MPa)
- Tensile strength, N/sq.mm (MPa)
- TS/YS Ratios
- Elongation %
- Cold Bend Test
- Diameter of pin used, in
- Bending angle, degree
Note:
- Tests are conducted in accordance with PNS-49.
- Results are those obtained at the time of test and pertain only to the sample received by the laboratory.
OUR SERVICES
CONTACT US
SEYAR AZADANI, PMP
PRESIDENT & CEO
Seyar Azadani has over 20 years of CPM scheduling and construction management experience working with general contractors and project owners, including the USACE, DOT, VA, Meta, QTS, Turner, Donohoe Construction, and Whiting-Turner company. As a Construction CPM Scheduling Consultant, Seyar has provided Primavera P6 CPM Scheduling services for government agencies and the private sector, representing owners, general contractors, construction managers, and architects.
Seyar has proven knowledge, expertise, and experience in utilizing Oracle Primavera P6, Primavera P6 Team Member, Primavera Unifier, Bluebeam, MS Project, Procore, eBuilder, Tableau, Navisworks, and Autodesk Revit. As a project controls specialist, Seyar has assisted Meta and QTS with Data Center projects, including new build projects, retrofit projects, and leased spaces.
Seyar has provided project controls services to projects ranging from civil to industrial to high-rise construction, including hospitals and healthcare facilities, roads and highways, high-rise apartment buildings, and commercial projects, utilizing Primavera and MS Project CPM scheduling tools to create and maintain the CPM schedules for his clients. With the US Army Corps of Engineers projects, as a contractor and construction manager, Seyar has built military facilities, including completing the construction of a USACE training facility, a $200+ million project in the capacity of project construction director.
Seyar has a Master of Science degree in Construction Management from New York University (NYU) in Jan of 2012 and a Bachelor of Science degree in Civil Engineering in 2004.
